※
The Preset Function Key
This function is designed to set the number of banknote which needs
to be counted. The counting will stop when the counted number of
banknotes reaches your setting.
The number below is the total
number of counted notes.
※
The Manual Function Key
This function is designed for manual operation. Users have to press
MANUAL
button to make it work after you place the banknotes.
※
The ACC & Clear Function Key
This function allows the users to add different stacks of banknotes
together. Clear Key is for deleting the last accumulating result and it
should be effective in ACC mode.
※
The
＊
Function Key
This function key is designed for UV-Detection. Select this function
then this machine can detect counterfeit note. There are 8 different
UV sensitivity level can be selected.
How to Operate
※
The Check Function
Step 1
：
Power on the machine will enter Check Mode automatically. The
buzzer will alarm and the banknote gripper will be released. The LED
display will show the number “0”.
Step 2
：
Put the banknotes on the banknote holder and make the
banknote contact the starting sensor.
Step 3
：
The machine will start counting automatically and the counting
result will be displayed on the screen.
Step 4
：
The banknote gripper will be released automatically if the
counting number is correct (100).
Step 5
：
The buzzer will alarm when the quantity of banknotes is less or
greater than 100, user needs to press the button
RESET
to release
banknotes.
