USE
What to do before first use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your seller immediately.
• Never expose the shaver to temperatures below -10°C or higher than +40°C for long periods of time.
• In order to get an ideal cutting effect, check all accessories of product, as well as clean and maintain the product.
INTENDED USE
• Warning! Only use the device externally.
• The device is intended to be used for dry shaving of body hair. It is not suitable for removing head hair. Do not use
on your face!
• Any incorrect use can be dangerous!
• The skin and bodyhair must be clean and dry when being cut.
• Removes unwanted hairs on arms & legs
• The device is designed for personal use only and it not intended for commercial applications.
• The devise should only be used as describe in the operating instructions. Any other use is deemed to be improper.
USING THE APPLIANCE
• Remove the protective cap from the device.
• Press the on/off switch (4). The device and its light (3) switch on.
• Place the shaver heads (1) on the skin and guide them counter to the direction of hair growth while making
circular motions. Tip: Use your free hand to smooth down the skin to obtain the cleanest possible result.
• After use press the on/off switch again to switch off the device.
• Clean the shaver heads after each use.
• Charge the battery when the light flashes.
CHARGING THE RECHARGEABLE BATTERY
• Charge the rechargeable battery. Before first use, the hair shaver must be fully charged.
• Make sure the shaver is turned off.
• Insert the connector of the USB charging cable into the shaver micro USB socket (6) and the A connector into
the socket of USB mains adapter and plug it into a mains socket whose voltage corresponds to the
specification on the rating plate. The charging process begins. The light (3) flashes while charging. When the
battery is fully charged, the light goes out.
• Charging time:
2.5 hours
.
• Using time when fully charged:
1.
5
hours
.
• First pull the USB mains adaptor out of the plug socket and then disconnect the USB cable from device.
• Note: the shaving function is blocked during the charging process.
CLEANING
• Press the release button (7) and flip open the collection container (2). Dispose of the hair which is collected in it.
• Use the cleaning brush to thoroughly brush out the collecting container and the shaver heads (1).
• Flip the container shut. It must engage.
• Whipe down the housing of the device if necessary with a slightly damp cloth. Then dry thoroughly.
• Place the protective cap on the shaver heads.
• Store the device out of the reach of children and animals in a dry, clean, cool but frost-free place.
