USE & CARE MANUAL
PK-4102 (Rev 2)
Page 4
To remove the filters:
-
turn off the fan and the light
-
Pull the spring release handle
To reset the counter, press and hold the “off” button until
this message disappear.
Replace lights
Cleaning
Clean the metal when it is dirty; don't wait until it requires aggressive cleaning in order to restore it to its
original appearance.
To clean the stainless steel we recommend to use products designed for this purpose and clean, soft cloths,
sponges or paper towels.
AVOID ALL CONTACT WITH PRODUCTS CONTAINING HYDROCHLORIC ACID SUCH AS
BLEACH, as they can stain and damage the stainless steel surface.
Warning
Prior to change the light, switch power
off at service panel to avoid any risk of
accident. Allow the light cool, before
handling.
To replace the lights follow the following steps:
-
Remove the inner lamp lens cover by inserting a small flat blade
screwdriver into each of the three slots and gently prying it free.
-
Grasp the bulb and pull it straight out.
-
Replace with 12 volt, 20 watt halogen bulbs with a G4 base.
-
Replace inner cover by inserting the three retaining tabs into the
three slots and pressing them firmly in place.
1
2
