User Manual
User Manual
05
04
en
Accidental leakage
en
Operation
In the event of the unit being knocked over or tipped during using,
please follow the steps as below to avoid malfunction:
1.
Unplug the unit and remove cover.
2.
Pour out any remaining water from the water tank.
3.
Shake the unit gently to drain water, and then keep it natural
air drying for at least 24 hours.
1.
Keep the product upright, remove the upper lid. (Fig 1)
2.
Connect the AC adapter to the DC socket. (Fig 2)
3.
Add water to the water tank with a measuring cup. Ensure the water does not
exceed 200 ML, DO NOT add water during using. (DO NOT use water over 40 °C)
Add 2 or 3 drops essential oil per 100 ML water. (Fig 3)
4.
Cover the upper lid after adding water and essential oil. (Fig4)Note: Please cover
the upper lid before using.
5.
Please connect the AC adapter to the power supply.
6.
Press “LIGHT“ to turn on the light. Adjust the light intensity. (Strong/Weak/Off)
(Fig 5)
7.
Please press the “MIST“ switch in short time, indicator green light is on, the
diffuser work as the interval mist mode (work 30 seconds, stop 30 seconds). Press
the “MIST“ button again in short time, indicator red light is on, the diffuser runs
as the continuous working mode, press the “MIST“ button once again in short
time, the diffuser runs as the continuous working mode, press the “MIST“ button
onceagain in short time, the diffuser will stop spraying (During the running mode,
it can be turned off by long pressing the “MIST“ button). (Fig 6)
8.
If you don not use it fot long time, please pour out the remaining water from the
drain side, and then keep it well.
9.
When the power in on, the diffuser is in a standby mode with a beep.
10.
If there’s a lack of water in the tank, even though press the “MIST“ button, the
diffuser will automatically turn off.
11.
Mist and light switches off automatically when the water runs out.
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Fig 6
Water outlet
