BEFORE USING
ASSEMBLE LID HANDLE AND VIEWING WINDOW
1. Locate the lid, lid handle (the ends of handle are attached with 2
screws) and 1 piece of glass
2. Unscrew the screws on the handle for use.
3. Use screw driver to screw one end of the handle first.
Do not screw too tight yet before inserting the glass.
4. Insert the glass (as the viewing window) onto the opening of the lid top.
When necessary,
use 2 pieces of tape on both sides of the glass to
prevent it from moving when assembling the handle.
5. After the glass is placed on the lid opening, screw the other end of
the handle to the lid. Make sure both side of handle are tightly
screwed.
6. Remove the tape that were used for temporarily
securing the glass before cooking.
CLEAN
1. Remove all packaging materials.
2. Wash the Cooking Pan, Lid, and any accessories with warm soapy
water using a sponge or dishcloth.
3. Rinse thoroughly to remove soap residue.
4. Wipe body clean with a damp cloth.
Do not use abrasive cleaners or scouring pads.
Do not immerse the appliance in water at any time.
PRE-HEAT BEFORE FIRST USE OF ROASTER OVEN
1. Slight smoke and odor may be emitted during the first few uses. We
recommend
pre-heating the Roaster Oven to eliminate the smoke
and odor.
2. Ensure temperature control is set to the "OFF" position and plug into
a 120V AC outlet ONLY.
3.
Set timer and temperature. The timer must be set for the roaster
oven to start operating. Pre-heat the oven for 30 minutes at 400
°
F or
until smoke and odors no longer exist.
4
