Mineral Deposits
Hard water can leave mineral deposits
that create scale build-up on the interior
of the kettle. If mineral deposits occur,
follow these steps:
1. Fill the kettle halfway with water.
2. Following the instructions in
Boiling Water
on
page 8, bring the water to a boil.
3. Add one cup of white vinegar to the water in
the kettle.
4. Allow the mixture to soak overnight.
5. Empty the mixture and rinse out the kettle.
6. Refill the kettle with water only. Bring it to a boil
and empty again. Repeat as needed.
Helpful
Hints:
Using distilled water
will help to prevent
the buildup of mineral
deposits.
9.
Caution:
The stainless steel
portions of the kettle
will become extremely
hot during use and
remain hot for sometime
after.
Do not touch the
stainless steel body or
lid until the kettle has
cooled completely.
Never fill kettle with any
liquid other than water.
Never open the lid while
water is boiling.
· If the kettle is heated
with no water,
the internal safety
mechanism will
automatically turn the
kettle off. The power
button will automatically
return to the OFF
position. The kettle
will begin working
again after the internal
temperature drops to a
safe level or when water
is added and the power
button reactivates.
Note:
