Note:
· Assembly may be easier with another adult to assist by holding side panels upright.
· The use of protective gloves are recommended when assembling the dehydrator.
(Images are for illustrative purposes only).
2. Insert the #2 panel onto the left groove of the #1 panel. Hook bottom
latches properly. Ensure plastic handle is positioned at the top.
7.
To Assemble (
Cont.
)
3. Insert the #3 panel on to the right groove of the #1 panel. Hook bottom
latches properly. Ensure plastic handle is positioned at the top.
4. Place #4 control panel on rear side next to #2 and #3 panels. Ensure there is
no gap. Latch #2 and #3 panels to #4 control panel (4 total latches).
5. Insert each #5 bracket (5 pieces) onto the notches on the #2 panel ensuring
brackets are set evenly. The stopping tabs must go closer to the control panel.