The charging connector of your appliance is in the handle.
In order to charge, you must first secure the charging unit to a flat
wall, and then you should place it on the charging unit with the handle
attached to the body.
If you want to remove the charging unit from the wall, simply
loosen the screws for a few turns and move the charging unit
upwards.
You should charge your appliance for at least 4 hours before initial use
To fix the charger to the wall, first place the charger mounting template
on the wall at 9
8
cm above the floor and mark the holes. Drill holes and
insert the dowels using a drill with a 6mm diameter drill bit at the points
you marked. Lean the charging unit body against the wall, pass it through
the hole, tighten the screws and secure it.
21
