Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
FLASHLIGHTS IN THE WORLD
THE MOST TECHNICALLY ADVANCED
Armytek Optoelectronics Inc.
is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan.
.
10 years no-hassle warranty
§
Extreme beam distance up to
meters.
450
§
brightness
lumens.
Ultimate
–
170
0
LED
§
Constant brightness even in -25
º
C frost and with almost discharged batteries.
§
Distinct hotspot and minimal spill guarantee directed aim illumination.
§
Standard 1" body diameter matches up with most weapon mounts.
§
Reliable body, red/green/blue filters and original remote switches for comfortable Hunting and secure Military application.
§
Guaranteed durability stands up the recoil of any gun gauge and falling from 30 meters height.
–
§
The flashlight works for more than 5 hours at 50 meters depth.
Warnings
Care and Storage
Service and Warranty
Specifications are subject to change without notice.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email:
Address:
13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Predator
Model
Predator Pro XHP35 HI
Predator Pro XP-L HI
Predator Pro XB-H
LED
Cree XHP35 High Intensity
Cree XP-L High Intesity
Cree XB-H
Optics
Smooth Reflector
Brightness stabilization type
FULL (constant light)
Light output, LED / OTF lumens*
1700 / 1400
1200 / 1000
700 / 550
Peak beam intensity, candelas
5
0750
47750
36200
Hotspot / spill
5
°
/
4
0°
5° / 40°
4° / 40°
Beam distance*
451 meters
437
meters
380 meters
Modes and runtimes
(measured with 18650
Li-Ion 3400mAh until
the light output drops
to 10% of the initial
value)
Turbo2
1400 lm / 1h
1000
lm / 1
.3
h
55
0 lm / 1
.7
h
Turbo1
800 lm / 1.7h
670
lm / 1
.8
h
40
0 lm / 1
.8
h
Main3
350 lm / 4h
370
lm /
3.5
h
31
0 lm /
3.5
h
Main2
150 lm / 10.5h
170
lm /
8.5
h
1
5
0 lm /
8.5
h
Main1
30 lm / 50h
28
lm /
36
h
3
0 lm /
36
h
Firefly2
1.7 lm / 40d
1.7
lm /
18d
2
lm / 1
8d
Firefly1
0.15 lm / 200d
0.35
lm /
100d
0.2
lm / 1
00d
Strobe2
1
5 Hz
/
1400 lm
/
2h
15 Hz /
1000
lm / 2
.7
h
15 Hz /
550
lm /
3.3
h
Strobe1
1
5 Hz
/
150 lm
/
22h
15 Hz /
170
lm /
17
h
15 Hz / 1
5
0 lm /
17
h
Power source
1x18650 Li-Ion / 2x
18350
Li-ion /
2xRCR123 Li-ion / 2xCR123A
Size and weight (without batteries)
Length 154mm, body diameter 25.4mm, head diameter 41mm, weight 135g
We DO NOT RECOMMEND to use low-quality CR123A batteries, because they can explode. Turbo mode needs rechargeable
18650 Li-Ion batteries without PCB (unprotected) or with PCB which guarantees 7A discharge current
for stable work.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Do not disassemble the flashlight except for unscrewing the thread ring gage and replacing the rubber button. There are no
other parts in the flashlight that can be replaced by the user.
1.
Always follow the instructions from this manual and recommendations on battery usage.
2.
Apply only the recommended power sources.
3.
Do not reverse battery polarity.
4.
Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5.
Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6.
Do not allow water or any other liquid to leak into the flashlight.
7.
Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8.
Do not allow children to use the flashlight without your assistance.
It is recommended to clean the threads and O-ring
s
off dirt and old grease
once or twice per year. Remember that
reliable
protection
from water and dust cannot be provided by worn out sealing.
The
fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1.
Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2.
Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3.
Clean the metal threads with a brush using ethanol. Be careful not to allow
the
applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
Armytek provides free warranty repair for 10 years from the
date of
purchase.
Warranty doesn't cover damage caused by:
1.
Improper usage.
2.
Attempts to modify or repair the flashlight by nonqualified specialists.
3.
Longtime application in chlorinated or polluted water, or other liquids (other than water).
4.
High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5.
Usage of low-quality batteries.
The producer will
not be liable for any harm done to the user if it was caused by
improper use of the product.
In case the rubber button is damaged, it should be replaced. You can also replace the switch with
the spring in the same way.
Replacement order:
1.
Unscrew the tailcap.
2.
Unscrew the first washer inside it to take out the switch. To do so you should use needle-
nose pliers (round-nose pliers or another tool, the most suitable will be expansion pliers).
Use the tool as it is shown at the picture. To replace the rubber button unscrew the second
washer under the switch.
3.
Replace the rubber button and assemble the parts in inverse sequence.
