Set description
Operation
The f
lashlight ha
s
two
operational
variants
:
Turbo
–
permanently switched light at
Turbo
mode
(
activated by click
with the head of the flashlight tightened
up
). It's an easy and
comfortable operational mode for Hunters, especially when the flashlight is used with
a
remote switch.
Additional
–
permanent
ly
or intermittently
switched light at
one of the Additional modes
at user's choice (
activated by click
with the
head of the flashlight
unscrewed to 1/8
).
Additional modes: Firefly, Main1, Main2, Main3, Strobe (hidden).
Momentary on
Release
Half Press & Hold (no click)
1/2
ǁ
ON
OFF
Momentary on
.
Any mode
switched
on
by half-pressing of the button and
active till the button is released.
In Turbo mode s
uitable for
giving signals by short button pressings.
In Additional mode
quick half-pressings can be used to switch modes.
Turbo
.
Tighten the head of the flashlight if it is
unscrewed
.
First full
click
of the button turns the light on.
Second full
click
turns it
off.
Additional
modes (F 3 Main + Strobe (if enabled)).
If the head of the flashlight is tightened
up
,
unscrew
it for 1/8
of a circle.
F
ull
click
of the button turns the light on at
the last
used Additional mode
.
Cycling through Additional modes.
To switch the
mode
turn the flashlight o
ff
and o
n
(
by full
click
or half-pressing).
The
modes
switch cyclically
: Firefly - Main1
- Main2 - Main3 - Strobe (if enabled).
Adding Strobe to Additional modes.
Strobe
is a hidden mode which you can add or remove from
the additional modes at your choice. To enable (remove)
Strobe: when the flashlight is ON unscrew and tighten up the
head of the flashlight at least 10 times (while rotation you will
change the modes). The pause must be <1 sec.
Partner
x2
Items included in the package:
1 -
Flashlight
2 -
Clip
3 -
Spare rubber button
4 -
Holster
5 -
Lanyard
6 -
2 spare O-rings
7 -
User manual
2
5
4
3
6
7
1
Click x1
Tighten up
Turbo
Click x1
Unscrew to 1/8
Additional
Adding Strobe to Additional modes
x10
Unscrew & Tighten up x10
ь
Depending on the model, your
flashlight
can inconsiderably differ from the pictures in the manual.
ь
The producer reserves the right to change the package at his own discretion without modifying this manual
.
Initial Service
We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable)
can leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries
in, use new and quality batteries, store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least
once a month. If you have noticed any signs of batteries' defects, withdraw them from the flashlight and take out of operation. It is also
recommended to replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.
To set/replace batteries:
1.
Unscrew the tailcap.
2.
Place the batteries with the positive contact (+) facing the head of the flashlight.
3.
Adjust the tailcap and tighten it as far as it can go.
1.
2.
3.
Cycling through Additional modes
Firefly
Main3
Main1
Strobe
Main2
*
* If enabled
Half Press & Release (no click)
1/2
Automemorizing.
After switching off the last used Mode is memorized for quick 1-click access at next switching on.
Lock-out function.
Unscrew the tailcap to 1/4 for the protection from accidental switching on.
Low Battery Indication.
If the brightness is <25% from the nominal value, the LED flashes 2 times
ONCE (after 30sec from switching
on). If you are not sure if it flashed or not switch the flashlight off and on: in case the battery is low flashes will repeat. Light output
decreases to Firefly mode at critical level.
Active temperature control (for Partner C2/C4 only).
T
he flashlight
can quickly heat up
in
Turbo
mode
. W
hen
the temperature becomes
+60
°
C –
the brightness decreases by
small steps
. After cooling-down
(
provided that battery voltage is sufficient
)
the brightness
increases to the
Turbo
mode again. This stepping goes cyclically to maintain the user's safety and the flashlight's functionality. In
conditions of good air-cooling the flashlight delivers light
without stepping down
even in
Turbo
mode. There are no preset timers for
stepping, but real-
time
active temperature measurements.
