Armstrong Rada 320 Скачать руководство пользователя страница 12

12

Limited Warranty and Remedy

Armstrong Hot Water Group, Inc. (“Armstrong”) warrants to the original user of those products supplied by it and 

used in the service and in the manner for which they are intended, that such products shall be free from defects in 

material and workmanship for a period of one (1) year from the date of installation, but not longer than 15 months 

from the date of shipment from the factory [unless a Special Warranty Period applies, as listed below]. This 

warranty does not extend to any product that has been subject to misuse, neglect, or alteration after shipment 

from the Armstrong factory. Except as may be expressly provided in a written agreement between Armstrong and 

the user, which is signed by both parties, Armstrong 

DOES NOT MAKE ANY OTHER REPRESENTATIONS OR 

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY 

OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE

The sole and exclusive remedy with respect to the above limited warranty or with respect to any other claim 

relating to the products or to defects or any condition or use of the products supplied by Armstrong, however 

caused, and whether such claim is based upon warranty, contract, negligence, strict liability, or any other basis 

or theory, is limited to Armstrong’s repair or replacement of the part or product, excluding any labor or any other 

cost to remove or install said part or product, or, at Armstrong’s option, to repayment of the purchase price. As 

a condition of enforcing any rights or remedies relating to Armstrong products, notice of any warranty or other 

claim relating to the products must be given in writing to Armstrong: (i) within 30 days of last day of the applicable 

warranty period, or (ii) within 30 days of the date of the manifestation of the condition or occurrence giving rise 

to the claim, whichever is earlier. 

IN NO EVENT SHALL ARMSTRONG BE LIABLE FOR SPECIAL, DIRECT, 

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF 

USE OR PROFITS OR INTERRUPTION OF BUSINESS.

 The Limited Warranty and Remedy terms herein apply 

notwithstanding any contrary terms in any purchase order or form submitted or issued by any user, purchaser, or 

third party and all such contrary terms shall be deemed rejected by Armstrong.

Armstrong International
221 Armstrong Blvd., Three Rivers, Michigan 49093 - USA
Ph: (269) 279-3602   Toll Free: (888) HOT-HOSE (468-4673)   Fax: (269) 279-3130

           

ALIB-320-C

Rada 320

Printed in U.S.A. - 5/12

© 2012 Armstrong International, Inc.

Designs, materials, weights and performance ratings are approximate and subject to change without notice.

Visit 

armstrong

international.com for up-to-date information.

Special Warranty Periods are as follows:

Flo-Direct Gas Fired Water Heater

The stainless steel structure and stainless steel internals (flame, tube, pall rings, supports, etc.) shall 

have a ten (10) year non-prorated guarantee against burn out or any structural failure caused by 

materials and workmanship. Provided only clean potable water is heated. The other components on the 

Flo-Direct, such as valves, combustion equipment, electrical controls, and the burner shall have a two 

(2) year non-prorated guarantee against failure caused by materials and workmanship.

Flo-Rite-Temp Instantaneous Water Heater

The tube bundle shall have a 10-year guarantee against failure caused by materials or workmanship 

provided by Armstrong but not against gasket failure or damage caused by corrosion, water hammer or 

lack of proper cleaning.

Flo-Rite-Temp Packaged Instantaneous Water Heater

Two (2) years from the date of installation, but not longer than 27 months from the date of shipment. 

See above for tube bundle guarantee.

Flo-Eco High Efficiency Gas Water Heater

The heat exchanger and supplied integral components such as the burner, the electrical controls and 

valving shall have a two (2) year warranty from the date of installation but no longer than 27 months 

from the date of shipment. The tank and replaceable tank liner shall have a 5 year warranty from the 

date of shipment.

The Brain – Model DRV80

 and derivative assemblies shall have a 5-year all component parts warranty.

Содержание Rada 320













Отзывы: