background image

AMC-1222 CO/NO

2

 Multidrop 

 

 3  

1

 

WARRANTY 

The AMC-1222 Module is warranted against defects in material and workmanship for a period of 
two years from date of shipment (For sensor warranties see section 2.1).  During the warranty 
period, The Armstrong Monitoring Corporation will repair or replace components that prove to 
be defective in the opinion of AMC.  We are not liable for auxiliary interfaced equipment, or 
consequential damage.  This warranty shall not apply to any product, which has been modified 
in any way, which has been repaired by any other party other than a qualified technician or 
authorized AMC representative, or when such failure is due to misuse or conditions of use. 
 

1.1 LIABILITY 

All AMC products must be installed and maintained according to instructions.  Only qualified 
technicians should install and maintain the equipment.  AMC shall have no liability arising from 
auxiliary interfaced equipment, for consequential damage, or the installation and operation of 
this equipment.  AMC shall have no liability for labour or freight costs, or any other costs or 
charges in excess of the amount of the invoice for the products. 
 
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, 
AND SPECIFICALLY THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.  THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE 
DESCRIPTION ON THE FACE THEREOF. 
 

1.2  MODIFICATIONS AND SUBSTITUTIONS 

Due to an ongoing development program, AMC reserves the right to substitute components and 
change specifications at any time without incurring any obligations. 
 

1.3 PRODUCT RETURN 

All products returned for warranty service will be by prepaid freight and they will only be 
accepted with a repair number issued by AMC.  All products returned to the client will be freight 
collect. 
 

WARNING 

USING ELECTRICALLY OPERATED EQUIPMENT NEAR GASOLINE, OR GASOLINE 
VAPOURS MAY RESULT IN FIRE OR EXPLOSION, CAUSING PERSONAL INJURY AND 
PROPERTY DAMAGE.  CHECK TO ASSURE THE WORKING AREA IS FREE FROM 
SUCH HAZARDS DURING INSTALLATION OR WHEN PERFORMING MAINTENANCE, 
AND USE PROPER PRECAUTIONS. 

 
 

Содержание AMC-1222






















Отзывы: