6
STRANGULATION/SUFFOCATIONHAZARD: The top edge of the
stationary rail must be level with or below the top of the adult mattress when used
as a Co-Sleeper brand bedside bassinet. The level of Co-Sleeper brand bedside
bassinet mattress must be a minimum of 4 inches below the top edge of the
stationary rail.
®
®
WARNING:
WARNING:
NEVER USE as a Co-Sleeper brand bedside bassinet in Co-sleeping
®
position without the anchor plate attached and locked as shown. Failure to use this
anchoring system could result in serious injury or death to the infant. Make sure all
straps are secured and tight. Check straps before each use.
Failure to use this securing system will allow the Co-Sleeper brand
®
bedside bassinet to move away from the adult bed and could result in infant falling
out of Co-Sleeper brand bedside bassinet.NEVER leave infant unattended in Co-
Sleeper brand bedside bassinet.
®
®
WARNING:
WARNING:
STRANGULATION/CHOKING HAZARD Do not allow excess strap
(or any other loose object) to find it's way into Co-Sleeper brand bedside bassinet.
Do Not allow excess strap to lay loose on floor because someone may trip over it.
®
WARNING:
Make sure all Velcro straps are secured and tight. Periodically
®
check your product to make certain all Velcro and screws are tightened securely.
®
Make sure Push Button on leg extension mechanism is secured
for proper bed height.
WARNING:
Cleaning:
Mattress: Wipe clean with a damp cloth. Air dry. Do not machine wash or use hot iron.
Mattress sheet: Machine wash, lukewarm water. Do not bleach. Air fluff dry. No heat.
Lining: Machine washable on lukewarm setting use delicate cycle. No chlorine bleach. Drip dry.
Metal Frame: Wipe with soft damped cloth. Air dry.
Maintenance:
Regularly check screws and spring lock to make sure they are secured in place.
Wipe surface with a damp cloth or sponge using mild detergent water.
G
When reattaching lining, secure the Velcro tabs to the removable rail.
®
