© 2013 Armored Fitness Equipment, LLC
Page 7
8.
When assembly is completed, the following test and adjustment needs to be performed before
regular use. Before completing this test, we highly recommend that you view the General Use
videos posted at
www.ArmoredFitness.com
. Once there, click on the Support menu.
Locate an area where you can push the XPO Sled straight for at least 10 yards. Load the weight
plate post with at least one 45# weight plate.
Aggressively push the XPO Sled to the end of your 10 yard (or more) area, put your foot on the
kick tape, turn the sled around, and push it back. Repeat this aggressive relay push 10 times.
Re-tighten the rear axle tab bolts.
Congratulations! Your XPO Sled is now ready for use. If you notice that your XPO Sled does not roll
straight, please see the section later in this manual on ALIGNING THE FRONT WHEEL AND ADJUSTING
CHAIN TENSION. It is a good idea to read this section now to understand how to perform maintenance
that may be required on your XPO Sled in the future.
