9
GETTING TO KNOW YOUR
ORBITAL POLISHER
TERRYCLOTH APPLICATOR
BONNET
WOLLEN BUFFING BONNET
WATER-RESISTANT FOAM
BUFFING WHEEL
MOTOR HOUSING
POMMEL GRIP
BARREL GRIP
VENT OPENINGS
POWER CORD
ON/OFF SWITCH
HANDLE FOR
SIDE-BUFFING
Before using your new Armor All™ orbital polisher, read and familiarize yourself with the safety rules listed in this
manual and with the features below.
Cord:
12" Power cord
Base Pad:
6" Water-resistant
On/Off Switch:
Easy toggle on/off switch
Vent Openings:
Do not block or expose to water
Terrycloth Applicator Bonnet:
For applying wax or polish. Washable and re-usable.
Soft Buffing Bonnet:
For removing wax or polish and buffing. Reusable.
Side Grip:
For side or low-to-ground tasks
Barrel Grip:
Standard grip for best stability
Pommel Grip:
Comfortable grip for light tasks
WARNING:
Do not allow familiarity with your orbital polisher to make you careless. Remember that a
careless fraction of a second is sufficient to inflict severe injury.
WARNING:
Your orbital polisher is designed for and
should only be connected to an AC power supply
that is 120 volts, 60 Hz (normal household current)
. Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor will overheat. If your orbital polisher does
not operate when plugged into an outlet, double check the power supply.
