Remote Control
6
5
4
7
4. On / Off
Press this key to turn on controller. Press and
hold to turn off. The controller will remember
the controller state when powered off, and will
return to that state when powered back on.
5 / 6. Brightness adjustment
Press the “
▲
” and “
▼
” keys to adjust brightness.
7. Remote indicator
When pressing keys, the indicator blinks if the remote
is working properly. If the indicator flashes slowly
when pressing keys, battery power is low and it needs
to be replaced. Replace with a CR2032 battery.
Remote control operation
8. Using the remote control
Pull out plastic battery insulation tab before use.
The RF wireless remote will work through non-metal
walls and doors. Do not install in a metal enclosure.
9. Pairing with a new remote control
The remote control and receiver are already paired,
but up to 5 remotes can be paired to one receiver.
To pair a new remote:
1. Disconnect power to receiver
and wait five seconds.
2. Reconnect power.
3. Within ten seconds, press the ON/OFF
and “
▼
” keys simultaneously
for about three seconds.
10. De-pairing remotes
To de-pair a remote control, pair the remote you
wish to continue using with the controller and
any other paired remotes will be de-paired.
Safety protection
The controller has built-in protection for incorrect
wiring, output short circuiting, overloading and
overheating. If the any of these conditions occurs,
the receiver will automatically shut down until
the issue is corrected. If this occurs, check
to make sure the connected LED lighting is
rated for constant voltage current and is in the
controller’s voltage output range. Also, make sure
all cables are securely connected and insulated,
and that the receiver is well ventilated.
Specifications
Output mode ..........................PWM constant voltage
Working voltage .......................................5–24V DC
Rated output current ..................................... 1x10A
Brightness grade ....................................... 11 levels
PWM grade ........................................... 4000 steps
Overload protection ............................................Yes
Overheat protection ............................................Yes
Remote frequency .................................433.92MHz
Remote control range ....... >49 ft./15m in open areas
Controller dimensions .......... 1.97 X 0.59 X 0.28 in./
................................................ 87 X 24 X 14.5mm
4
5
Customer support
Email:
Phone:
410-354-6000
Monday–Friday, 9 a.m.–5 p.m., ET
Three-year limited warranty
This product is for dry location use only. Improper
installation, improper powering, abuse, or failure
to use this device for its intended purpose will void
warranty. Proof of purchase is required for all returns.
Questions? Email [email protected].
© 2021 Armacost Lighting. All rights reserved.
210601
armacostlighting.com
