Copyright © 2015 ARM Ltd. All rights reserved.
Debug and Trace Configuration
MCB1800 – NXP LPC1800
ULINK
pro
Debugger and Trace Adapter
Connect ULINK
pro
to the
Trace
connector of the board and choose
ULINK Pro Cortex Debugger
.
Click
Settings
.
On the
Pack
tab,
enable debug description.
On the
Debug
tab, select
Port
SW
.
Trace Settings (SWO trace)
On the
Trace
tab,
ensure
Core Clock
corresponds to
the CPU Core Clock as specified in
your project.
Check
Trace Enable
.
For the Trace Port, select
Serial Wire Output–Manchester
,
disable
Autodetect
and
set
SWO Clock Prescaler
to
2
.
More instructions for trace configuration can be found on
www.keil.com/mdk5/ulink/ulinkpro
In
Quick Links
, select
ULINK
pro
User’s Guide
; continue with
Configure Cortex-M Devices for
Tracing
, then chapter
NXP LPC18xx Devices
.