Signal Descriptions
ARM DDI 0388I
Copyright © 2008-2012 ARM. All rights reserved.
A-5
ID073015
Non-Confidential
A.4
Configuration signals
shows the configuration signals only sampled during reset of the processor.
shows the
CP15SDISABLE
signal.
Table A-4 Configuration signals
Name
I/O
Source
Description
CFGEND
I
System configuration control
Controls the state of EE bit in the SCTLR at reset:
0
EE bit is LOW.
1
EE bit is HIGH.
CFGNMFI
I
Configures fast interrupts to be non-maskable:
0
Clear the NMFI bit in the CP15 c1 Control Register.
1
Set the NMFI bit in the CP15 c1 Control Register.
TEINIT
I
Default exception handling state:
0
ARM.
1
Thumb.
This signal sets the SCTLR.TE bit at reset.
VINITHI
I
Controls the location of the exception vectors at reset:
0
Start exception vectors at address
0x00000000.
1
Start exception vectors at address
0xFFFF0000
.
This signal sets the SCTLR.V bit.
Table A-5
CP15SDISABLE
signal
Name
I/O
Source
Description
CP15SDISABLE
I
Security
controller
Disables write access to some system control processor registers in Secure state:
0
Not enabled.
1
Enabled.
See