ARLO – ALO-MP1255 8
For assembly advice or parts go to www.farmersfurniture.co.nz or call 0800 100 858
Step 6 –
base shelf
Lay the
Base Shelf
on a smooth clean surface with holes facing upwards.
NOTE: The Base Shelf has a
purple mark on the back edge.
Insert two
H2 Large Cams
into each end of the Base Shelf as shown in diagram. Ensure the arrow on
the top of the Cam points towards the top edge of the Shelf.
Push two
H15 Dowels
into each end of the Shelf as shown below.
H2
H15
Step 7 –
fixed shelf
Lay the
Fixed Shelf
on a smooth clean surface with holes facing upwards.
Insert two
H2 Large Cams
into each end as shown in diagram. Ensure the arrow on the top of the
Cam points towards the top edge of the Shelf.
Push two
H15 Dowels
into the each end of the Shelf.
Screw two
H1 Connecting Bolts
into the holes as indicated on the diagram below.
Screw on the two
H53 Magnetic Catches
using the
H7 Panhead
Screws and the
H7 Panhead Screws
as shown below. Use the pre-drilled holes.
H2
H15
H53
H7