After you have wired all the receivers according to Figure illustration you need to do the following:
1.
Pull off the plastic film cover of the battery at the back of remote.
2.
Pair remote and receiver: short press the Learning Key on the receiver, then immediately short press the
or . Once you do that, the LED lights will blink once. Now your remote and receiver are paired! Do the same
for the other receivers if you use them, you can add as many optional receivers as you wish.
3.
Press and can dim 4 zones brightness independently.
Long press : dim brightness from 0.1%-100%.
long press : dim brightness from 100%-0.1%.
and switch on/off 4 zones together.
Memory Reset:
In case you want to reset the memory of the receiver, press the learning function button for 10 seconds while
the unit is being powered. The unit will then reset to factory defaults.
Operation
Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
4 zones remote
Press ON button toturn on
Press OFF button to turn off
A.Short press to turn ON/OFF
B.Long press to dim
C. 4 zones independently control
