Контроллер BL-RF5B
(12/24V, 216/432W, ПДУ сенсор)
Brief Introduction:
Feature chart for Key 2:
5. Matching code:
Press Key 4 once within 3 seconds when power on again. The light will blink
3 times if matching is successful. Clearing Code Press Key 4 five times within 3 seconds when
power on again,.the light will blink 6 times if clearing is successful.
BL-RF5B is a multi-function Touching RGB LED
Controller. It adopts the most advanced PWM re
-
omte control technology, can control all the full color
LED lighting with four lines three circuits (common
anode), with more than 640 000 combination colors
and 15 auto light changing modes. It widely applies
to RGB LED strip light, LED Module, etc.
1 Auto Color Changing
8 grades of brightness to adjust by pressing Key 4 or Key 5.
2 3 colors jump to change
8 grades of
speed to adjust
by pressing Key4
or Key5
9
Green color jumps to change
8 grades of
brightness
to adjust by
pressing Key4
or Key5.
3 7 colors jump to change
10 Yellow color jumps to change
4 3 colors jump to gradual change
11 Cyan color jumps to change
5 7 colors jump to gradual change
12
White color jumps to change
6 red colors jumps to change
8 grades of
brightness to ad-
just by pressing
Key4 or Key5.
13 Red/blue light twinkles alternately
8 grades of
speed to adjust
by pressing
Key4 or Key5.
7 blue colors jumps to change
14 Green/blue light twinkles alternately
8 purple colors jumps to change
15 Red/green light twinkles alternately
•
Power supply:
AAA battery x 3pcs
• Cover Material:
ABS
• Fabrication processing: multicolour printing & UV varnish
• Working voltage:
DC12V/24V
•
Output control:
3 circuits (R/G/B)
•
Control current:
6A/circuit
•
Connecting mathod:
common anode
• Wireless frequency:
433.92MHz
• Receiving range:
20meters
Key 1:
on/off
Key 2:
light changing mode (15 modes)
Key 3:
color light/white light switching mode
Key 4:
turn up (brightness/speed)
Key 5:
turn down (brightness/speed)
1. Press Key 1
to turn on/off in any state.
2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.
3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5.
Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or
changing light color by touching the color ring.
4. Resume fuction: The previous settings will be resumed while power on again
Technical Parameters (remote control):
Technical Parameters (controller):
Functions of Keys:
How to Use:
