1. Remove all the sub assemblies
from the box.
2. Place the base weight fixing nuts into
the holes at the bottom of the heavy
weight (Fig.1).
Place the base weight fixing screws
one by one through the holes in the
outer pole flange and base, making
sure that all of the screws, holes and
nuts are aligned before tightening.
(Fig .2).
Model No
APF107
Rated Voltage
220-240V a.c.
Rated Frequency 50Hz
Power
130W
Place the base fixing device through
the base fixing washer into the outer
pole (Fig.3), ensuring that the
assembled base is stable.
3. After loosening the height adjustment
fastener and removing it from the
outer pole, slide the base cover onto
the base of the outer pole. Replace
and secure the height adjustment
fastener into position again. Now the
assembly of the fan base with pole
has been completed.
4
5
CPIN002693
EXPLODED DIAGRAM
TECHNICAL SPECIFICATIONS
ASSEMBLY
Figure 1
Figure 2
Figure 3
Figure 4
Pole Screws
Height
Adjustment
Fastener
Base Cover
Pole
Base
Base Weight
Base Weight
Base Fixing
Device
Base Fixing
Washer
Base Nuts
1. Base fixing device
2. Base fixing washer
3. Base weight fixing nuts
4. Base weight
5. Pole screws
6. Rear grille screws
and washers
7. Grille fixing screw & nut
8. Fan Blade Screw
7
8
5
6
4
3
1
2