1. For doorway entry, mount the detector vertically to
cover a narrow detection area and set to chimes (Fig. 01).
2. For alarm operation, mount the detector horizontally
to cover a wide detection area (Fig. 02).
3. Not recommended to operate through glass (for applications
where detection through glass is required we recommend
Arlec Security Beam AM471.)
4. Do not install your Entry Detector where it can be exposed
to direct sunlight.
5. Do not install on or near heat sources such as radiators,
bright lights or near cook tops or stove. The indirect heat
may cause the alarm to activate.
6. Avoid installing your Entry Detector where severe changes
in ambient temperatures may occur.
7. On very hot days the sensitivity may be decreased due to
the ambient temperature being closer to normal body
temperature, this is unavoidable. On very cold days the
sensitivity may also be affected when people are wearing
extra clothes and therefore emitting less body heat for the
sensor to detect.
Fig.01
Fig.02
USER HINTS
W
A
LL
W
A
LL
W
A
LL
W
A
LL
130
VERTICALLY WALL MOUNTED
SIDE VIEW
TOP OR PLAN VIEW
TOP OR PLAN VIEW
SIDE VIEW
HORIZONTALLY WALL MOUNTED
W
A
LL
W
A
LL
W
A
LL
W
A
LL
130
VERTICALLY WALL MOUNTED
SIDE VIEW
TOP OR PLAN VIEW
TOP OR PLAN VIEW
SIDE VIEW
HORIZONTALLY WALL MOUNTED
Arlec guarantees this product against defects of materials and workmanship for a period of 12 months from the date of
purchase provided that the product is used in accordance with Arlec’s recommendations and within such voltage and current
limits as are specified by Arlec in relation to the product. Arlec will at its own option make good, replace with the same or
similar product, or provide credit for any product manufactured or supplied by it, which proves to be defective within the
limits set out above provided that no repairs, alterations or modifications to the product have been undertaken or attempted,
other than by the company or its authorised agents. Should the purchaser wish to make a claim under the guarantee, the
product should be returned pre-paid to the place of purchase. This guarantee is in addition to and does not take away from
any rights available to the consumer under the Trade Practices Act and the State consumer protection legislation.
Proof of Purchase
• Please retain your purchase receipt for all warranty claims.
GUARANTEE
For all Sales enquiries
Phone (03) 9727 8860 Fax 1300 360 650
CPIN44/2
© This instruction leaflet is subject to copyright and must not be reproduced, copied or otherwise used in any way
or for any purpose without the consent in writing of the owner, Arlec Australia Pty Ltd (ACN 009 322 105).
AM490_CPIN44/2.indd 2
14/05/10 9:17 AM