4
• Locate the product near an open window or open
door. Then open another outside window or door
on the opposite side of the room so that “flow
through” ventilation is created. It will not work
properly in a closed room.
• Always begin operation before the air tempera-
ture reaches unacceptable levels. Due to the low
running cost of the unit it is more effective to leave
the unit running during periods of occupation.
• Once filled with water and in the correct location,
connect the unit to electrical supply and place
casters in locked position. Turn the FAN control
to the desired speed, either Low, Medium or High.
This control operates the fan motor only.
• Before performing any cleaning or maintenance,
switch off and remove the plug from the power
socket. Also disconnect the unit from the mains
water supply (if connected).
• After extended periods of use replace the water
in the tank with fresh water.
• The water storage tank must be drained when not
in use:
1. Position a water tray flat on the floor beneath
the drain hole.
2. Unscrew the drain plug at the bottom of the
unit, allowing the water to drain out.
Model: AEC019
Noise:
≤
69dB
Voltage: 220-240Va.c. Maximum Air Flow: 2800m3/h
Frequency: 50Hz
Water Tank Capacity: 40L
Net Weight: 19kg
Net Size: L695xW438xH1050mm
Gross Weight: 23kg
Max Water Inlet Pressure: 300kPa
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a
retailer that this product will be free of defects in materials and workmanship for
a period of 24 months from the date of purchase; provided the product is not used
other than for the purpose, or in a manner not within the scope of the recommenda-
tions and limitations, specified by Arlec, is new and not damaged at the time of
purchase, has not been subjected to abuse, misuse, neglect or damage, has not
been modified or repaired without the approval of Arlec and has not been used for
commercial purposes (“Warranty”). If you wish to claim on the Warranty, you must,
at your own expense, return the product, and provide proof of original purchase and
your name, address and telephone number, to Arlec at the address below or the
retailer from whom you originally purchased the product within 12 months from the
date of purchase. Arlec will (or authorise the retailer to) assess any claim you may
make on the Warranty in the above manner and if, in Arlec’s reasonable opinion, the
Warranty applies, Arlec will at its own option and expense (or authorise the retailer
to) replace the product with the same or similar product or repair the product and
return it to you or refund the price you paid for the product. Arlec will bear its own
expenses of doing those things, and you must bear any other expenses of claiming
on the Warranty.The Warranty is in addition to other rights and remedies you may
have under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of accept-
able quality and the failure does not amount to a major failure.
3. When empty replace the plug.
• To clean the external housing, use a damp cloth.
Do not use abrasive cleaning liquids or
chemical agents (alcohol, gasoline, etc.)
to clean the appliance.
• When not used for a long period of time, store
in a dry, dust free area.
• The air cooling pads must only be replaced by a
service agent or similarly qualified person in order
to avoid a hazard.
• To begin the cooling/evaporation process, turn
the COOLING control on. The pump motor will then
energize and distribute water over the cooling
pads. The air moving over the cooling pads
will create a cooling effect after a few minutes
of operation.
• To operate the louvers turn on the SWING control.
This will allow the vertical louvers to move
from side to side distributing the air throughout
the room. You can change the air direction (up
or down) by manually adjusting the horizontal
louvers with external levers on the front right hand
side of the unit.
OpERATION
ClEANINg ANd mAINTENANCE
SpECIFICATIONS
WARRANTY
For all Sales & Warranty enquiries
Arlec Australia Pty. Ltd. ACN 009 322 105
(“Arlec”) gives the Warranty.
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Customer Service: (03) 9982 5111
Email: [email protected]
CPIN002750
CPIN002750.indd 4
6/09/13 3:37 PM
