6
EN
Instructions for use
• Open the lid, remove the basket and fill the reser-
voir with water. Do not fill beyond the level indica-
tor. Make sure the basket is above water.
• Press the “Power” or button to start the pro-
cess.
• Select the size of the ice cubes by pressing the
“Select” button. If the room temperature is be-
low 15°C, select “Small” or “Medium” ice cubes
to prevent the ice cubes from melting together.
• The entire process of making ice cubes takes be-
tween 6 and 12.
• Check the water level regularly. When the water
level is too low the appliance will stop automati-
cally and the “add water” or indicator will light
up. Press the “Power” or button, fill the water
reservoir up to the level indicator and press the
“Power” or button again.
• Let the appliance rest for 5 minutes to let the
coolant in the compressor settle before restart-
ing the appliance.
• The ice maker stops automatically when the bas-
ket is full.
• Put fresh water in the reservoir every day.
• When not in use, empty the reservoir via the drain
tap.
• Beware: Never tip the appliance more than 45°
and do not turn the appliance upside down. This
will damage the appliance beyond repair.
NOTE: The control functions are the same between
271551 and 271568 except design of control panel.
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
• There is a filter in the water reservoir. This filter
should be cleaned frequently. Remove the filter
from the water reservoir and rinse it thorough-
ly with lukewarm water. Detergents may also be
used. Rinse the filter afterwards with clean water
so that no residue of detergents remain.
Descaling
This appliance should be descaled frequently. As
soon as calcification occurs, this appliance will not
function properly anymore. To keep this appliance
in optimum condition and to ensure it’s operation,
it is crucial that you descale the appliance on a reg-
ular basis. Depending on the hardness of the water
and the frequency of use, you need to repeat the
following procedure regularly.
Use to decalcify the ice cube maker use a descal-
ing agent that also is used for e.g. coffee makers.
You can also use citric acid or cleaning vinegar as
a de-scaling agent. To ensure the proper mixture
read the instructions supplied with the agent.
1. Fill the water reservoir with the de-scaling agent
according to the terms of the agent. Never ex-
ceed the maximum level.
2. Turn the power switch “On”. The ice cube basin
will now be filled with water. You can hear that
the pump is pumping the water from the reser-
voir to the ice bucket.
3. At the time the ice cube basin is filled and the
water supply stops: immediately push the button
“Off”.
4. The ice cube basin will reset to zero and the
descaling agent will be spread through the ap-
pliance.
5. Switch the power switch back “On”.
6. Repeat this procedure (step 1 till 4) several times
with de-scaling agent.
