ARKSEN 002-AU-30035, Руководство пользователя

Страница: 6 / 9

6
FIRST TIME INSTRUCTIONS
STEP ONE:
Tilt caddy frontwards (handle up). Take wheel axle and insert
018 washers to the end of wheel axle (see image below).
Insert the metal shaft to the caddy.
STEP TWO:
Put wheels on and follow with washers and cap nuts on the
wheel axel. Tighten cap nut with a wrench.
STEP THREE:
Remove the 3 red hex nuts from bottom of each side of
caddy. Attach the red foot and then re-screw the 3 red hex
nuts to each side.
STEP FOUR:
Take the 3” universal wheels with brakes and attach to the red
foot on each side. Take the (8) M8 Lock nuts and screw on to
each side so that wheels are secure. Tilt the caddy back to its
standing position.
STEP FIVE:
Take Teflon tape and wrap tightly around the pump pipe 5-8
times. Screw on oil pump and use the wedge lock washer to
position pump and tighten.