If you need to obtain technical assistance,
please contact ARKRAY Europe, B.V.
84-10013
Issued: 2022.10.06
How to Attach
1. Place the instrument onto the printer at an
angle as shown in the
fi
gure.
2. Press the top of the instrument to snap it into
place.
3. Make sure the top of the instrument and printer
are horizontally level with one another and that
both units are
fi
rmly locked to each other.
How to Detach
1. Place the instrument on a level surface (such
as a desk).
2. While pressing on the casing above the display
at a point aligned with the center of the display
(a), lift up the reading unit cover from the
bottom (b).
NOTE:
The printer runs on AC power only, not on batteries.
Once the printer is attached to the instrument, connect the instrument through
the printer to an AC outlet.
