Arkray Glucocard X-Meter Скачать руководство пользователя

Страница: 72 / 74

• The GLUCOCARD™ X-METER System is not designed to be a substitute

for pathology laboratory equipment and should not be used for the

diagnosis of diabetes.

• Use only fresh capillary blood. Do not use serum or plasma or venous

whole blood.

• Do not use the GLUCOCARD™ X-METER to test neonates. It has not

been validated for neonatal use.

• Always insert the test strip into the meter first, then prick the finger.

Not doing so may result in an“E-6” appearing on the display or a test

result that is higher than the actual value.

• Do not use at altitudes higher than 10,000 ft (3,048 m).

• Interference testing demonstrated an 18% bias when 10 mg/dL

mannose was added to a 60 mg/dL glucose sample.

Содержание Glucocard X-Meter











































































Результаты поиска

Содержание Glucocard X-Meter

Отзывы:

Похожие инструкции для Glucocard X-Meter

Бренды по названию

Популярные бренды

Arkray Glucocard X-Meter, Руководство пользователя

Результаты поиска

Содержание Glucocard X-Meter

Отзывы:

Похожие инструкции для Glucocard X-Meter

Бренды по названию

Популярные бренды