Arkpak AP730, Инструкция по эксплуатации

Страница: 8 / 20

BATTERY SELECTION
Select Battery
CAPACITY
100 Amp Hour
110 Amp Hour
120 Amp Hour
130 Amp Hour
Select Battery TYPE
Lead Acid Battery
Gel Battery
Calcium Battery
AGM Battery
CALCIUM Battery
selected are you sure?
NO
YES
ARKPAK MODEL ACDC7
NO
YES
Have you installed a new battery?
Voltage
12.0V
TEMP: 22c
TYPE: Calc
CAP: 100 A/Hr 10% Charge
Step 3. Battery confirmation - CALCIUM batteries only
If you selected CALCIUM battery you will be asked to confirm your selection. Calcium batteries need to
be charged at a much higher voltage which could cause damage to other battery types.
- Select
YES if you are charging a CALCIUM battery – Proceed to step 4
- Select NO return to Battery type selection
Step 4. Battery Capacity Selection
Using the MENU buttons, scroll up or down to your battery size in Ah (amp hours) rating and press OK
to select. If your battery Ah rating is not listed then select the next level down i.e battery size 105Ah –
select 100Ah
Your battery setup is now complete and the main data page will appear. The charge process for your
specific battery chemistry will commence in 30 seconds.
These settings are now saved in the ArkPak. Please note the next time you turn the ArkPak on the
welcome screen is bypassed and the main data screen will appear.
If you disconnect the saved battery or connect a new battery the welcome screen will appear first (refer
to step 1) and you’ll need to select ‘yes’ or ‘no’ again.
6
CAUTION – the ArkPak only saves the last battery setup, the setup process will have to be
completed every time a different battery is charged