!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2010 Arkon Resources, Inc.
SM410
| Windshield Suction and Air Vent Mount Kit with Universal Cradle - Cont.
Flat side face up
Attach the universal cradle to the dual-T head by inserting the
dual-T tabs
(Q)
into the dual T-slots
(R)
on the back of the
cradle or device.
Attach the vent mounting clips
(L)
to the back of the pedestal
(M)
with the vent clips positioned with the
fl
at sides facing up.
Step 1.
Air Vent Mount Assembly
L
M
Step 1.
Step 1.
Swivel Ball Head Assembly Attachment
Attach Universal Cradle to Air Vent Mount
Slip the tightening ring
(N)
over the air vent mount ball.
Snap the dual-T head adapter plate
(O)
on to the mounting
ball
(P)
. Screw the tightening ring over the adapter plate
until securely holding the plate. Swivel to adjust the angle
of the dual-T head.
N
O
P
Pinch the vent mounting clips
(L)
so that the teeth open and
gently insert vent pedestal into vent louvres until the mount-
ing clips are attached to the
fi
n/blade of the vent. Adjust the
support leg
(S)
vertically until it rests
fi
rmly along the bottom
of the vent or dashboard surface below the vent.
Step 1.
Air Vent Mounting
!
Use caution when adjusting the swivel head. Use caution when
inserting or removing the pedestal or the phone from the cradle.
Make sure that the teeth of the vent clips are open wide enough
to not damage the vent
fi
ns / blades.
L
S
Place the phone or device into the cradle with the device
sitting on the support legs
(G)
. Clamp the grip arms
(H)
inward to
fi
rmly grasp the device. Press the release button
(I)
to open the arms.
Device Insertion and Removal from Cradle
Step 1.
I
H
G
If necessary, adjust the removable support legs by sliding
them laterally on top or bottom of the cradle. These will
provide added support and stability for your device.
Universal Cradle Adjustments
Step 1.
R
Q
