Package Contents:
(1) GN014-SBH - Deluxe mini windshield suction pedestal
(1) GN047-SBH - Swivel air vent mount
(1) SM040-2 - Universal phone cradle with adjustable feet
(1) AP013 - Optional adhesive circular disc for dash / console
(1) Alcohol cleaning pad
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
Do not place mount in or near an air bag deployment
zone or where it will obstruct view of the road.
!
SM410
| Mini Windshield Suction and Air Vent Mount Kit with Universal Cradle
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2010 Arkon Resources, Inc.
No tools required for installation.
Dash or Console Mounting (Optional)
Step 1.
Step 2.
Find a safe location on the dash or console. Use the inclu-
ded alcohol pad to clean the mounting surface if necessary.
Remove the paper backing on the adhesive disc and
fi
rmly
press in place.
Place the pedestal’s suction base
(J)
over the center of the
circular disc. While
fi
rmly holding the pedestal on top of
the disc,
fl
ip the base lever down
(K)
to the locked position.
K
J
Windshield Mounting
Step 1.
A
B
D
C
Step 3. Adjust the angle and rotation of the pedestal head by
loosening the swivel-tightening ring
(D)
.
Universal Cradle Attachment
Step 1. Attach the universal cradle to the dual-T head by inserting
the dual T-tabs
(E)
into the dual T-slots
(F)
on the cradle back.
Place the phone or device into the cradle with the device
sitting on the adjustable support legs
(G)
. Clamp the
grip arms
(H)
inward to
fi
rmly grasp the device. Press the
release button
(I)
to open the arms.
Device Insertion and Removal from Cradle
Step 1.
Step 2.
Find a safe location on the interior of the vehicle’s wind-
shield to mount the pedestal. Firmly push the suction base
(A)
against the windshield and
fl
ip the base lever down
(B)
to the locked position. See diagram below.
Adjust the angle of the pedestal arm by tightening the
angle adjustment knob
(C)
at the base to the desired angle.
AP013
Adhesive
Disc
SM040-2
Universal
Phone Cradle
GN014-SBH
Mini Windshield
Suction Mount
GN047-SBH
Air Vent Mount
SM04
Unive
Phone
I
H
G
F
E
