5
OPERATION
1.
Switch on the sound source (TV set or audio component) that the
transmitter is connected to.
2.
Place the headphones On/Off switch in the On position.
3.
Place the headphones on your head and adjust the volume to obtain
the desired sound level.
4.
If you cannot find the best reception frequency, press the "Auto
Scan" button on the headphones.
NOTE:
You should then be able to move around freely from one room to another
without any interference. If interference does occur (interruptions in the
signal), press the "Auto Scan" button once to find a better reception
channel.
A For better stereo reception, stay approximately seven meters away
from the transmitter when you press the "Auto Scan" button.
B
If it is impossible to find a satisfactory frequency, change the setting
on your transmitter, then press the "Auto Scan" button on the
headphones to find the corresponding channel.
To both protect the transmitter and save power, the transmitter
automatically switches off after approximately four minutes if there is no
audio signal, or the signal that it receives from the audio source is too
weak for proper reception. If however the signal returns to an acceptable
level, then the transmitter automatically switches back on.
