Please locate the wooden parts shown above
Use No. 502 glue (ergo 5400 recommended) to glue each part following the pictures
shown above. Beware of the orientation of the part (colored in red). It should be aligned
with the two side panels. Meanwhile be careful with of the position of the two side panels,
don't glue them reversed.
Next, assemble the main fuselage. Follow pictures shown above to stick these parts
to the wooden nose. Ordinary foam glue is alright for this.
Next, due to the need of VTOL mode, we need to cut away some part of the plastic
foam to ensure the upper and lower air holes are under alignment.
