The clock signal is only needed if the LED strip has a clock input.
It is not safe to connect a power supply with a voltage that doesn’t match the LED Strip
specifications. The Kling-Force itself will accept b5 to +12V and regulate it for its
internal electronics but not to power LED Strips.
Powering the LED Strips individually
If your LED Strips come with an individual power supply you must wire them in this way:
If there are individual power supplies for the LED Strips, you should not connect the V+ to
the Kling-Force interface, but straight to the V+ of the LED Strip power supply.
The GND and Data must always be connected. The clock must be connected if your LED Strip has a
clock input.
4