ARKA VIDA-GT Скачать руководство пользователя страница 47

Страница: 47 / 49

VIDA-GT

Operating Instructions

Page 47 / 49

Operating Instructions

In case of a power outage all entered values are saved. Then the

unit works with the same settings as before the power outage.

ARKA Dosing system should be used only for the purposes as

described in the instructions.

Protect the system from moisture, water spray and salt water.

Do not install the device in cabinets aquariums, especially those

which are closed. If there are signs of corrosion warranty claims
are not accepted.

Аvoid direct irradiation of the unit of light sources with high UV. Do
not install VIDA-GT Master or Slave near strong water sources.

Use only original hoses from ARKA. Transparent hoses of PVC,

especially those with an internal diameter of > 3.5 mm strongly are
not recommended.

The hoses must be at a minimum distance of 2 cm from the

surface of the water to avoid refoulement of the water.

Please take care when installing VIDA-GT, the liquid (e.g.

disconnecting a hose or similar) may leak.

For wall mounting please use only suitable screws for your wall

supplied as an accessory or the original strips for attaching ARKA.

We recommend the replacement of the hoses every 2 months.

Содержание VIDA-GT


















































Результаты поиска

Содержание VIDA-GT

Отзывы:

Бренды по названию

Популярные бренды

ARKA VIDA-GT, Руководство пользователя

Результаты поиска

Содержание VIDA-GT

Отзывы:

Бренды по названию

Популярные бренды