7
Preparations
Actions Before the First Use (8 Steps)
1 Visually inspect the
Battery Charger
for transport
damage.
2 The package should be recycled according to
local regulations.
3 Read the
IFU
.
4 Unpack the
Battery Charger.
5 Charge the battery until the indicator LED turns
green.
6 Prepare an area that is dry, with good ventilation
and out of direct sunlight for storage of the
Battery Charger
.
7 Choose a designated area where the
IFU
should
be kept, accessible at all times.
8 Make sure to have a rescue plan ready in case of a
patient emergency.
Actions Before Every Use (2 Steps)
1 Carry out a thorough inspection for damage.
2 If any part is missing or damaged – do NOT use
the product!
NOTE
If you have any questions, please contact your
local ArjoHuntleigh representative for support
and service. The contact information
(
ArjoHuntleigh addresses
) is listed at the end
of this IFU.
Installation of Charger
Installation
• Keep the
Battery Charger
away from main access
areas.
• The
Battery Charger
is designed for dry
surroundings and may not be installed in
bathrooms or any other wet areas (IP2X).
• Mount the battery holder to a suitable wall with
two screws.
(See Fig. 1)
For screw specifications,
see
Technical Specifications on page 11
.
• Check label on battery and charger
• Plug in the
Battery Charger
to a standard power
(AC) outlet.
• The
Battery Charger
is not allowed to be used in
a patient environment.
Fig. 1
