Programming
25
001.
16
010
.33
r
e
v. 8
How to read the number of cycles made by the Maxi Sky 440:
1. Select parameter 4 in the service mode (4 beeps).
2. After you have heard the 4 beeps, push on the X button on the hand control to select the option.
You will hear a certain number of beeps. The number of beeps indicates the number of cycles
performed by the Maxi Sky 440 (each individual beep represents approximately 250 additional
cycles), see “Conversion table” on page 26.
How to reset service light:
1. Select parameter 5 in the service mode (5 beeps).
2. After you have heard the 5 beeps, push the X button on the hand control to select the option
(reset the service light).
3. To reset the service light, push the UP button on the hand control until you hear 3 beeps. Each
time you push the UP button, you increase the number of beeps that you will hear.
4. After 3 beeps, push the X button on the hand control to select the option (reset the service light),
you will hear 1 beep confirming your selection.
5. The service light is reset.
How to return to normal mode:
6. Unplug the red/white wire from the battery and push the UP button a few seconds to drain the
remaining energy out of the circuit board.
7. Plug the red/white wire into the battery.
8. The Maxi Sky 440 is back into normal mode.
Содержание maxi sky 440
Страница 1: ...Maxi Sky 440 Technical Manual 001 16010 33 rev 8 July 2013 ...
Страница 33: ...Labels on the Lift 33 001 16010 33 rev 8 1 Product Name 2 Serial Number Label 3 Charger Information ...
Страница 34: ...Wiring Diagram 34 001 16010 33 rev 8 ...
Страница 37: ...Technical Specifications 37 001 16010 33 rev 8 Dimensions ...