2
Pull each leg strap under the thigh
so that it emerges on the inside of
the thigh.
1
Place the sling around the
patient. For sling with head
support extend to top of
patient’s head.
Place attachment loop on
the hook.
Make sure that the safety
latch is closed.
3
Loop sling
4
Place spreader bars at 45° and, close enough to attach
shoulder loops then the leg loops.
Raise foot-end of spreader bar first using the Recline
button to create tension on the leg loops.
The sling must encircle the patient's buttocks
to provide better support and to achieve a
proper installation
5
6
Raise the patient.
Move the patient.
7
8
Lower until no tension. Detach the
leg loops, then shoulder loops.
001-31310-EN Rev 0 • 05/2020 • Page 1/4
QUICK REFERENCE GUIDE - USE
Maxi Sky 2 PLUS
Transfer from seated to supine position
