manualshive.com logo in svg

Arjohuntleigh ENTERPRISE 9000X, Инструкция по эксплуатации, Страница: 50 / 68

Поделиться
Скачать
Arjohuntleigh ENTERPRISE 9000X Скачать руководство пользователя страница 50

50

Weighing system 

Be sure to follow all local guidelines or regulations regarding weigh scale 
verification and calibration.

 

The weigh system should be re-verified before the date of expiry shown on 
the bed. Make sure the bed is re-verified every 12 months. If verification 
does not pass, the weigh system should be re-calibrated. 

Refer to the product service manual for verification and calibration 
procedures or contact an approved ArjoHuntleigh service agent.

Fig. 26 - Weighing Calibration Expiry Label

WARNING

The procedures below must be carried out by suitably trained and qualified 
personnel. Failure to do so may result in injury or an unsafe product.

Actions to be done by qualified personnel

Yearly

Check that the bedstripper (linen shelf) (Optional) remains in its closed 
position when maximum foot down tilt is applied 

Check that the bed operates correctly using the backup battery as described 
in the section “Battery test” on page 51.

Check operation the of castors, paying special attention to braking and 
steering functions

Check that the calf section moves to the Fowler position when the thigh 
section is raised

Check that the calf section latches securely in the horizontal (vascular) 
position when manually raised.

Check that the bed extension locks securely in all three positions

Examine the power supply cord and mains plug; if damaged, replace the 
complete assembly; do not use a rewireable plug

Examine all accessible flexible cables for damage and deterioration

Check all accessible nuts, bolts and other fasteners are present and correctly 
tightened 

Check any accessories fitted to the bed, paying particular attention to 
fasteners and moving parts

1

Содержание ENTERPRISE 9000X





































































Отзывы:

Нет отзывов