2s
2s
Autofirm mode
2
1
Activate:
Press and hold
the button.
Comfort indicators flash
and mattress inflates to
Autofirm.
Extend:
Press button to extend 5
minutes. Max. 30 min.
If not extended, pump
goes back to previous
mode.
1
3
Deactivate:
Press and
hold the button or select
another mode.
Pressure reached –
Autofirm and Control
comfort indicators turn to
constant.
Transport mode (mattresses only)
2
1
Activate:
Press side buttons simultaneously and remove tubeset.
The mattress supports the patient for up to 12 hours.
Deactivate:
Reconnect the tubeset. The pump goes back to the
previous mode
CPR rapid deflation unit
Activate:
Press both CPR release
buttons simultaneously.
Reset:
Press down the open part
until it clicks into closed position.
“Click”
Make sure the front part is open.
The air evacuates in 15 seconds.
“Click”
2s
2
Alternating mode, default setting
2
1
Activate:
Press button, the Alternating mode indicator is shown.
Adjacent cells inflate and deflate on a 10 minute cycle.
Deactivate:
Select Reactive CLP or Autofirm mode.
If no further therapy is required, remove patient from
the surface and turn off the pump.
Reactive CLP mode
2
1
Activate:
Press and hold the button.
Reactive CLP mode indicator is shown.
Deactivate:
Select Alternating mode or Autofirm mode.
If no further therapy is required, remove patient from
the surface and turn off the pump.
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com
08.AI.02EN_01 • 06/2020 • Page 2/2