Installation
Place the
Aura
seat cushion on top of
the chair surface.
From a standing position in front of
the chair and facing it, make sure
the cells are uppermost, the tubeset
appears from the front right corner
of the cushion and the cells are in a
horizontal position across the chair.
Secure the seat cushion to the
chair surface using the fixing straps
provided.
If the chair is of the closed side type
with a removable cushion, fix the
Aura
seat cushion as shown.
To complete the seat cushion installation:
Zip the protective cover over the cushion.
Make sure the Arjo logo is uppermost and at the front of the
cushion.
Quick Start:
When the
Aura
pump is switched on at the mains
supply, all indicators will momentarily flash.
Set the Run/Standby switch on the side of
the pump to the Run (
|
) position
Allow approximately 2 minutes for the seat cushion to
inflate fully.
Once the patient is on the seat cushion, adjust the cell
pressures using the comfort control according to the
patient’s preference.
Caution
: Do not use the seat cushion without a foam cushion
beneath it.
Installing the pump:
Position the pump feet down on any
convenient horizontal surface or
alternatively suspend from the chair
frame by means of swing out hooks.
Connect the male and female air feed
tubes into the appropriate outlets on
L
‘
‚·
¢
the pump unit. Push connectors in until they click. Make sure
the air feed tubes are not “kinked” or twisted.
Insert the mains power plug into a suitable mains power
socket.
Caution
: Do not use the Aura seat cushion without a
foam cushion beneath it.
Caution
: Always use the Aura seat cushion with the
protective top over.
Caution
: Always use the Aura seat cushion in the correct
orientation.
Caution
: Avoid trailing cables - ensure that cables and
tubing are positioned beneath the chair to
avoid causing a hazard.
Make sure the cells are in a horizontal position across the
chair, NOT from front to back.
® and ™ are trademarks belonging to the Arjo group of companies.
© Arjo 2019.
As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. The content of this publication
may not be copied either whole or in part without the consent of Arjo.
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com
500937EN_03: 05/2019
