8
Electromagnetic Compatibility
001-24257-EN rev
. 4
Electromagnetic Compliance
The Wall Mounted Battery Charger has been tested for compliance with current regulatory
standards regarding its capacity to block EMI (electromagnetic interference) from external
sources.
Nonetheless, some procedures can help reduce electromagnetic interferences:
• Ensure that other devices in patient-monitoring and / or life-support areas comply to accepted emissions
standards.
• Maximize the distance between electro-medical devices. High-powered devices may produce EMI that
can affect the charger.
For more information on how to manage the unit’s RF electromagnetic environment, please
consult the
AMI TIR 18-1997 - Guidance on Electromagnetic Compatibility of Medical Devices for
Clinical / Biomedical Engineers
.
Electromagnetic Emissions
WARNING : Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that they are operating normally.
WARNING : The equipment may cause radio interference or may disrupt the operation of nearby
equipment. It may be necessary to take action, such as reorienting, relocating the equipment or
shielding the location.
WARNING : Use of accessories, cables and spare parts other than those specified or provided by
Arjo could result in increased electromagnetic emissions or decreased electromagnetic
immunity of this equipment and result in improper operation.
Guidance and Manufacturer’s Declaration -
Electromagnetic Emissions - For all Equipment and Systems
The Wall Mounted Battery Charger is intended for use in the electromagnetic environment
indicated below. The customer or the user of the Wall Mounted Battery Charger should assure
that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Wall Mounted Battery Charger uses RF energy only
for its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The Wall Mounted Battery Charger is suitable for use in all
establishments, including domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations / flicker
emissions
IEC 61000-3-3
Complies
