Page | 2
Introduction
R
Introducti on
GENERAL INFORMATION
Thank you for purchasing a quality Bonaire Evaporative Cooler. We care about your safety and would ask
you to spend a few minutes reading these simple instructions before installing or operating this product.
Safety!
Read carefully all of these instructions prior to installing and
operating the unit.
Read and Save these Instructions. Do not throw these Instructions away.
Complete the unit assembly before attempting to install, refer to page 8.
Installation of this cooler in any manner not prescribed by these instructions could cause a safety
issue and
WILL
void any warranty.
Use only with a 110V 60Hz single phase grounded outlet.
Do not operate cooler with Rear Filter Panel removed.
Do not operate cooler with a damaged cord, plug or other component.
Do not run the power cord under carpet or other floor covering.
Do not use the power cord with an adaptor plug that converts the 3 pin plug into a 2 prong
connector.
Do not use the cooler with an improperly grounded outlet.
Do not alter or modify this cooler.
Do not allow children to install, operate or service this cooler.
WARNING:
To reduce the risk of fire or electric shock, do not use this product with any solid state
speed control device.
Use only qualified electricians for replacement or servicing of switches, or electrical motors and
components in this cooler.
Unplug the cooler and position the rotary control knob to the OFF position when installing, servicing or
cleaning.
This Window Mounted Cooler is suitable for installation in windows (either Sash hung or sliding) with a
minimum opening width of 560mm (22”) and Height of 560mm (22”), please ensure that the directions
for
correct
mounting
are
adhered
to
for
the
SAFE
operation
of
this
Cooler.
