Arizona Albatros C.III, Сборка и историческая справка

Страница: 12 / 36

SHEET
2 of 8
ARIZONA
MODEL
AIRCRAFTERS
A registered tradename of P
rototype P
roduction and Engineering inc.
14795 North 78th W
ay Unit 800, Scottsdale Arizona 85260.
Refer
ence Photo Plate
Copywrite 1997 by
Arizona Model
Aircrafters a registered tradename of Prototype Production and Engineering inc.
N
A
RIZ
A
Mercedes D.1
1
Mer
cedes
Assembly Notes:
This engine kit is intended for use in flying and static display models. All laser cut components are highlighted in blue on the drawings. For additional information on dif
ferences between versions refer to
the DII (160 hp) photos included in the kit. For more detailed notes on this and the 200 hp version refer to Jane’
s Fighting
Aircraft of
WWI ,
Bob Banka’
s Scale Model Research catalog and Scale
Aircraft drawings
V
ol I by
Air
Age Publications.
Depending on the level of scale detail and if the engine is to be built as a stand alone display
, additional materials may need to be added. Good results in
crankcase detail can be achieved by sheeting the crankcase formers with basswood strips as opposed to balsa.
The wood will seal easier and give a
more realistic look when completed.
W
e have achieved very realistic finishes
by first coating the wood with several coats of white glue prior to painting with an aluminum paint. Carburetor manifolds are painted on flying versions. If you are building the kit as shown in the photographs as a museum display we can supply copper and aluminum leaf for a realistic finish.
The addition of small 1-72 and 2-56
hardware details will complete the model. Lar
ger scale kits may have a combination of wooden and fiber
glass cylinders.
These are to make it easier to mount your models engine inside the Mercedes. Use the hollow fiber
glass cylinders for routing exhaust tubing as necessary
.
The two bamboo sticks are used to attach the formers together and can remain inside the completed crankcase. For any one building a complete engine for a flying model we will cut custom plywood motor mounts for electric and gas motors for the material cost only
. Call for details.
Albatr
os and Pfalz Exhaust Manifolds
Make by forming the inner plywood and outer balsa
wood parts around a soda or oil (Depends on scale ).
Other manifolds designs are available.