Arius STN-1000, Руководство пользователя

Страница: 34 / 44

36
User’s Manual STN-1000
36
FUNCTION PIANO KEY CONTROLS
MIDI OUTPUT CHANNEL SELECT
- This function allow you to select which MIDI channel you want
to transmit MIDI data on. The default setting to transmit MIDI data is Channel 1.
1. Put the HP-3 into Function mode by pressing the Reverb/Effect button
and the Metronome button simultaneously, both of the LED’s will begin to
flash.
2. Press the G3 MIDI Output Channel Select piano key to put the piano into
MIDI Output Channel Select mode.
3. Press the piano key 0 - 9 on the keyboard to enter the channel number to
transmit on. You can directly enter it as a one or two digit number.
(EX: 12, press the 1 key and the 2 key). The channel range is 0 – 15.
4. Press the Voice Select button to return the HP-3 piano to operating mode
with the selected MIDI Output Channel.
C8 C7 C6 C5 C4 C3 C2 C1
MIDI OUTPUT CHANNEL SELECT
G3
1 2 3 4 5 6 7 8 9 0
Note:
This function is available when Multi-timbral mode is off.
F
U
N
C
T
I
O
N
REVERB/
EFFECT
METRONOME
VOICE SELECT
29
FUNCTION PIANO KEY CONTROLS
FUNCTION MODE
- To enter into the Function Mode:
FUNCTION MODE - The Function mode gives you access to these other features of the HP-3 piano.
Touch Normal
Transpose 0
Tuning A4=440.0Hz
Reverb On
Duet Piano Lesson Off
MIDI Channel Select Channel 1
Multi-Timbral Mode On/Off Off
Transmit MIDI Program Change On
RESETTING TO DEFAULT SETTINGS
- When the power is turned on, these functions are always
set to the default settings.
1. Press the Reverb/Effect button and the Metronome button simultaneously.
The LED’s for both buttons will begin to flash.
Note: When the HP-3 is in Function Mode with both Reverb/Effect and
Metronome button Led’s flashing, there will be no sound from the piano
keys.
2. Press the designated piano key or keys to change the value for the
selected function. See the various Functions listed above.
1. To exit the Function Mode press the Voice Select button. The Reverb/
Effect button will stop flashing but remain on. The Metronome button
will turn off.
2. Play the piano, you should hear the piano notes play with your se-
lected function engaged. It may be necessary to increase or decrease
your selected function.
1. At any time you can easily put the piano back to its default factory
settings. Hold down the Demo/Song button and the Reverb/Effects
button and the piano will reset to the default settings below.
TO EXIT THE FUNCTION MODE
PIANO TOUCH
C8 C7 C6 C5 C4 C3 C2 C1
TRANSPOSE
TUNING
DUET PIANO LESSON MODE
MIDI OUTPUT CHANNEL SELECT
MIDI INPUT CHANNEL SELECT
MULTI TIMBRAL MODE ON/OFF
TRANSMIT PROGRAM CHANGE ON/OFF
D3E3 F3 G3 A3 B3
VOICE SELECT
DEMO/SONG
REVERB/
EFFECT
F
U
N
C
T
I
O
N
REVERB/
EFFECT
METRONOME
Stn-1000
FUNCTION PIANO KEY CONTROLS