Ariterm BioComp-series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 32

20
MAINTENANCE
Checking the convection part
The boiler has been equipped with an
automatic convector cleaning but the
convection part should be checked 2-3 times
a year. Open the convector maintenance hatch
and lift it aside.
NOTE! The hatch is heavy.
Sweeping the convection part
If the pipe surfaces look sooty they must
be swept manually. Lift the spirals off the
convection pipes.
Check the pipes of the convector and remove
fly ash from the surfaces. Test that the spirals
move freely in the pipes. If the convection pipes
look clean no manual sweeping is required.
Use straight brush arm and tube brush. Check
through every convection pipe. Push the brush
all the way through to the ash compartment
then it is easy to pull back. Put the spirals back
and close the maintenance hatch.