Aritech MOD2000, Руководство по установке, Страница: 7 / 10

FP2000 MODEM INSTALLATION MANUAL (MOD2000) Revision 1: November 1997
Product Code: MAN-073 Document No: 971105/408/M
Page 3
4.3 INSTALLATION
4.3.1 Mounting the Modem into the Fire Panel
The modem is provided with a bracket for wall mounting. For installing this bracket into
the Fire Panel refer to Figure 1.
1. Remove the protective cover from the double sided self adhesive tape on the rear
mounting surface of the bracket.
2. Position the mounting bracket inside the Fire Panel as shown in Figure 1 and fix in
position using the double sided self adhesive tape.
1. Numeric Keypad 14. Optional Arcnet Network Card (NC2000)
2. Common LED Board 15. Power Supply & Battery Charger (230V version)
3. LCD Display and Backlight Board 16. 2xBattery
4. Host Processor Board 17. Optional Third Source Battery
5. Current Loop Terminal Connections 18. Memory Back-up Battery Jumper
6. RS232 Ports (port 1-front; port 2-back) 19. Non-volatile Memory Lock
7. Front-end Processor Board 20. Service/Commission Mode Switch
8. FEP Power Supply Board 21. Optional Printer (PR2000)
9. 2 Loop Driver Board (x2) 22. Auxiliary Inputs Terminal Connections
10. Sounder Relay Board 23. Loop 1-4 Terminal Connections
11. Zone Matrix Display Board 24. Terminal Connections Sounder Board
12. DIP Switch 25. Modem (optional)
13. Host Power Supply Board 26. DB9-DB25 Adapter
Figure 1: Mounting the Modem Bracket into the Fire Panel