manualshive.com logo in svg

Aritech FP2000, Справочное руководство

Поделиться
Скачать
Aritech FP2000 Скачать руководство пользователя страница 74

Sounder delay off times

(SET TIMES MENU, 4, 

)

SOUNDER DELAY OFF         Thu 07/12/00 10:39:52

Monday

:18:00

Friday

:18:00

Tuesday

:18:00

Saturday

:18:00

Wednesday

:18:00

Sunday

:18:00

Thursday

:18:00

Lnk

:none

0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

Return to Set Times Menu

Page 68

 

Select item to be changed

 

 or 0..9 change data in item (Unlock memory!)

 

Confirm change

The time each day that the Sounder Delay is automatically switched from ON to OFF is
set in this menu if the link is set to None. The time for each day of the week can be
allocated. 

Note

 that the switching of the delay from OFF to ON is a manual only operation

using the Sounder Delay ON/OFF pushbutton with the keyswitch enabled.

If no automatic delay off operation is required, then the time 00h00 must be used, it is
ignored by the FP2000 fire panel. The Sounder Delay can also be manually switched off
at any time using the front panel delay ON/OFF pushbutton.

Link: If the link is set to Fire Brigade, then the Sounder Off times are set to 00h00 and the
Fire Brigade Off Times (

Page 71

) are used to control the Sounder Delay. This means that

one time set is used if both the Sounder and Fire Brigade Delays are to be switched off at
the same time. Link must be set to none in order to use the Sounder Off Times.

*See Output Delays, Page 70

Содержание FP2000


















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды