I
NHIBITING
A
ZONE
This function is used to inhibit zones and exclude
them from the security system. You do this, for ex-
ample, when an zone is faulty or broken. By inhib-
iting it, you stop it causing an alarm until it is
fixed.
There may also be occasions when you want to in-
hibit a normal zone. For example, if you want to
leave a window open when the system is armed. By
inhibiting the zone associated with the window,
when you arm the system you will not set the alarm.
12
ATS User’s Manual
Start with the Code line on the bottom line
of the display.
Press the
MENU*
button
Enter your
PIN Code
Press
10 and ENTER
.
What happens next depends on whether or not there
are inhibited zones:
All zones are normal
- You can inhibit normal zones if
you know their zone number.
Enter the
zone number
and press
ENTER
to inhibit
the zone, or press
CLEAR
to exit programming.
Active zones
- There are one or more zones active.
These zones are listed either:
- one by one, or
- as a list of numbers
When the zones are listed one by one, to scroll use
the
NEXT
button
Depending on the state of the zones you can:
•
Inhibit the active zone
Enter the
Zone N°
and then press
ENTER
.
When finished, press
ENTER
and
CLEAR
to exit
programming.
•
Inhibit the normal zone
Enter the
Zone N°
and then press
ENTER
.
When finished, press
ENTER
and
CLEAR
to exit
programming.
•
Exit
- lets you exit programming.
Press
CLEAR
.
Press
ENTER
(See page 6 for more information on accessing menu options)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○
○
○
○
○
○
○
○
○ ○ ○ ○ ○
○
○ ○ ○ ○
○ ○
