Page 30
Programming manual for RD6203
6.
Test call menu
Test Call
The test call menus are used to configure the automatic test calls sent to Central Station. This may be
disabled by removing all telephone numbers assigned to event “RP” in the “Report Options” menu and setting
all automatic test call times to zero.
6.1.
Waiting period before the first test call
Test wait time HHH
Set the time in hours after which the first test call is sent.
6.2.
Time between 2 test calls
Test call time HHH
Enter the time between two test calls (in hours). This is usually 24 hours. The test call is sent every 24
hours irrespective of whether there has been an activation in the last 24 hours.
6.3.
Send a test call to the Central Station
Manual Test
With this option a manual test can be sent to the central station. In this test you select the telephone
number (Central Station 1, 2, 3 or 4), after which the test is started. Testing is always with the first
Account Nbr (this must be programmed!). The display shows the progress: whether there is a dialling
tone, a handshake and a kiss-off or acknowledge. If there is a fault you can locate it in this way. If the
test message has been received at the central station,
'Message accepted'
is displayed. The event
sent in SIA is
"RX"
.
R
EPORT
M
EANING
Dialler busy
The dialler is engaged with a test transmission.
No dial tone
No dial tone was detected.
Handshake recd.
The handshake was detected. The dialler starts to send the information.
No handshake
No handshake detected. The test report is aborted. This can occur if there
is a fault in the protocol, in the handshake or in the telephone number.
No Ack. detect.
The kiss-off or acknowledgement was not detected. The protocol is wrong
or the information has not been correctly received.
Call successful
The central station has received the message.
Table 10. Overview of reports while testing the dialler
6.3.1. Make a test call to Central Station 1
Tel no. 1 test
Test the telephone number of Central Station 1.
6.3.2. Make a test call to Central Station 2
Tel no. 2 test
Test the telephone number of Central Station 2.
6.3.3. Make a test call to Central Station 3
Tel no. 3 test
Test the telephone number of Central Station 3.
6.3.4. Make a test call to Central Station 4
Tel no. 4 test
Test the telephone number of Central Station 4.
Содержание Advisor RD 6203
